Alu-Cab LT-50 Lightweight Roof Top Tent Alu-Cab LT-50 Lightweight Roof Top Tent Melton 4WD Introducing the LT- 50 lightweight tent – The best ultralight rooftop tent on the market with the same build quality as all our other products. You don’t need to be an overlander to live your best life, the LT-50 opens up a new opportunity of vehicle applications. It pops up within seconds, you can keep your bedding inside and it can carry a 30kg load up top. One of the standout features of the Alu-Cab rooftop tent is its lightweight construction and it has a nut slot lid and base frame for easy mounting of accessories such as awnings, shower cubes, ladder brackets, spades etc. The tent is made from lightweight, high-strength aluminum, which makes it easy to install and transport. The tent also features a compact, streamlined design that minimizes wind resistance while driving. Tent weight – 46KGS | 101 LBSMattress – 4.55KGS | 10 LBS Overall, the Alu-Cab lightweight rooftop tent is an excellent choice for adventurers who value durability, convenience, and comfort. The LT-50 is the ideal tent for vehicles typically unable to support the Gen-3 range of tents, such as Subaru Outback / Crosstrek, Toyota Rav4 and many more! The LT-50 is not intended to replace the Gen 3-R, but rather be a more weekend lifestyle alternative for customers who do not require the full features of the 3-R. FEATURES: Tent weight [excludes mattress, excludes ladder] – 46KGS | 101 LBS Mattress weight – 4.55kgs | 10 LBS 60 mm high-density foam mattress with zip-off cover  Dual layer 280gsm UV resistant rip stop canvas The rooftop tent is made from a lightweight aluminium construction Wind resistant design thanks to single-sided opening Stainless steel eyelets for the spring poles Streamlined aerodynamic profile 3-point access with a door/window on each side Stainless steel 316 marine grade Gas-struts Hard-shell structure that can carry additional gear [up to 30kgs]  Opens and closes in seconds  Top and bottom foam insulation LT-50 ROOFTOP TENT ACCESSORIES AVAILABLE: Removable Fly sheet/rain cover 2m spec-built telescopic ladder with rungs that are broad and angled making it far more comfortable to climb into the tent barefoot[The ladder cannot be installed inside the tent. We advise using the Molle Plate and Ladder Storage Bracket for your convenience] Ladder Storage Bracket Ladder Extension Roof Molle Plate Wall Mount for the LT-50 Tent to Alu-Cab Load Bar Mounting Brackets Universal LT-50 Tent Mounting Brackets LOAD RATING FOR CARGO RAILS:  The load rating for the cargo rails on the rooftop tent roof is 30kg. It is important to note that where the load is located on the roof, will determine how easy or difficult it is to open the tent. It is always suggested to shift heavier loads towards the front of the tent, and much lighter loads, like a solar panel, to the rear. Please ensure to check dynamic load rating of your vehicle before placing additional weight to the LT-50. Alu-Cab advises to not exceed the speed limit of 120kmh. Note: The Backrest and Drop-down Table are not compatible with the LT-50 * Tent weight: excludes mattress, excludes ladder TENT WEIGHT [excludes mattress, excludes ladder] – 46KGS | 101 LBSMATTRESS WEIGHT – 4.55KG | 10 LBSMATTRESS THICKNESS – 60MM | 2.3”MATTRESS DIMENSIONS – 1085 x 2070MMTENT DIMENSIONS – 1261 X 2258 x 172MM | 49.6 x 88.89 x 6.77” BRACKETRY AVAILABLE: (Excludes load bars)Minimum load bar length: 1250mm | 49.2″ UNIVERSAL LT-50 MOUNTING BRACKETS [To fit non Alu-Cab Load bars]  LT-50 TO ALU-CAB LOAD BAR MOUNTING BRACKETS LOAD BAR FEET FOR MOUNTING ALU-CAB LOAD BARS TO THE LT-50
Melton 4WD

Alu-Cab LT-50 Lightweight Roof Top Tent

Code: AC-RT-L-B-K
Add Your Review

  • SPEEDY DELIVERY

  • GENUINE PRODUCTS

  • QUALITY GUARANTEE

Introducing the LT- 50 lightweight tent – The best ultralight rooftop tent on the market with the same build quality as all our other products. You don’t need to be an overlander to live your best life, the LT-50 opens up a new opportunity of vehicle applications. It pops up within seconds, you can keep your bedding inside and it can carry a 30kg load up top. One of the standout features of the Alu-Cab rooftop tent is its lightweight construction and it has a nut slot lid and base frame for easy mounting of accessories such as awnings, shower cubes, ladder brackets, spades etc. The tent is made from lightweight, high-strength aluminum, which makes it easy to install and transport. The tent also features a compact, streamlined design that minimizes wind resistance while driving.

Tent weight – 46KGS | 101 LBS
Mattress – 4.55KGS | 10 LBS

Overall, the Alu-Cab lightweight rooftop tent is an excellent choice for adventurers who value durability, convenience, and comfort.
The LT-50 is the ideal tent for vehicles typically unable to support the Gen-3 range of tents, such as Subaru Outback / Crosstrek, Toyota Rav4 and many more! The LT-50 is not intended to replace the Gen 3-R, but rather be a more weekend lifestyle alternative for customers who do not require the full features of the 3-R.
FEATURES:
  • Tent weight [excludes mattress, excludes ladder] – 46KGS | 101 LBS
  • Mattress weight – 4.55kgs | 10 LBS
  • 60 mm high-density foam mattress with zip-off cover 
  • Dual layer 280gsm UV resistant rip stop canvas
  • The rooftop tent is made from a lightweight aluminium construction
  • Wind resistant design thanks to single-sided opening
  • Stainless steel eyelets for the spring poles
  • Streamlined aerodynamic profile
  • 3-point access with a door/window on each side
  • Stainless steel 316 marine grade Gas-struts
  • Hard-shell structure that can carry additional gear [up to 30kgs] 
  • Opens and closes in seconds 
  • Top and bottom foam insulation

LT-50 ROOFTOP TENT ACCESSORIES AVAILABLE:

  • Removable Fly sheet/rain cover
  • 2m spec-built telescopic ladder with rungs that are broad and angled making it far more comfortable to climb into the tent barefoot
    [The ladder cannot be installed inside the tent. We advise using the Molle Plate and Ladder Storage Bracket for your convenience]
  • Ladder Storage Bracket
  • Ladder Extension
  • Roof Molle Plate
  • Wall Mount for the LT-50
  • Tent to Alu-Cab Load Bar Mounting Brackets
  • Universal LT-50 Tent Mounting Brackets

LOAD RATING FOR CARGO RAILS: 

The load rating for the cargo rails on the rooftop tent roof is 30kg. It is important to note that where the load is located on the roof, will determine how easy or difficult it is to open the tent. It is always suggested to shift heavier loads towards the front of the tent, and much lighter loads, like a solar panel, to the rear. Please ensure to check dynamic load rating of your vehicle before placing additional weight to the LT-50.

Alu-Cab advises to not exceed the speed limit of 120kmh.

Note: The Backrest and Drop-down Table are not compatible with the LT-50

Introducing the LT- 50 lightweight tent – The best ultralight rooftop tent on the market with the same build quality as all our other products. You don’t need to be an overlander to live your best life, the LT-50 opens up a new opportunity of vehicle applications. It pops up within seconds, you can keep your bedding inside and it can carry a 30kg load up top. One of the standout features of the Alu-Cab rooftop tent is its lightweight construction and it has a nut slot lid and base frame for easy mounting of accessories such as awnings, shower cubes, ladder brackets, spades etc. The tent is made from lightweight, high-strength aluminum, which makes it easy to install and transport. The tent also features a compact, streamlined design that minimizes wind resistance while driving.

Tent weight – 46KGS | 101 LBS
Mattress – 4.55KGS | 10 LBS

Overall, the Alu-Cab lightweight rooftop tent is an excellent choice for adventurers who value durability, convenience, and comfort.
The LT-50 is the ideal tent for vehicles typically unable to support the Gen-3 range of tents, such as Subaru Outback / Crosstrek, Toyota Rav4 and many more! The LT-50 is not intended to replace the Gen 3-R, but rather be a more weekend lifestyle alternative for customers who do not require the full features of the 3-R. FEATURES:
  • Tent weight [excludes mattress, excludes ladder] – 46KGS | 101 LBS
  • Mattress weight – 4.55kgs | 10 LBS
  • 60 mm high-density foam mattress with zip-off cover 
  • Dual layer 280gsm UV resistant rip stop canvas
  • The rooftop tent is made from a lightweight aluminium construction
  • Wind resistant design thanks to single-sided opening
  • Stainless steel eyelets for the spring poles
  • Streamlined aerodynamic profile
  • 3-point access with a door/window on each side
  • Stainless steel 316 marine grade Gas-struts
  • Hard-shell structure that can carry additional gear [up to 30kgs] 
  • Opens and closes in seconds 
  • Top and bottom foam insulation

LT-50 ROOFTOP TENT ACCESSORIES AVAILABLE:

  • Removable Fly sheet/rain cover
  • 2m spec-built telescopic ladder with rungs that are broad and angled making it far more comfortable to climb into the tent barefoot
    [The ladder cannot be installed inside the tent. We advise using the Molle Plate and Ladder Storage Bracket for your convenience]
  • Ladder Storage Bracket
  • Ladder Extension
  • Roof Molle Plate
  • Wall Mount for the LT-50
  • Tent to Alu-Cab Load Bar Mounting Brackets
  • Universal LT-50 Tent Mounting Brackets

LOAD RATING FOR CARGO RAILS: 

The load rating for the cargo rails on the rooftop tent roof is 30kg. It is important to note that where the load is located on the roof, will determine how easy or difficult it is to open the tent. It is always suggested to shift heavier loads towards the front of the tent, and much lighter loads, like a solar panel, to the rear. Please ensure to check dynamic load rating of your vehicle before placing additional weight to the LT-50.

Alu-Cab advises to not exceed the speed limit of 120kmh.

Note: The Backrest and Drop-down Table are not compatible with the LT-50

TENT WEIGHT [excludes mattress, excludes ladder] – 46KGS | 101 LBS
MATTRESS WEIGHT – 4.55KG | 10 LBS
MATTRESS THICKNESS – 60MM | 2.3”
MATTRESS DIMENSIONS – 1085 x 2070MM
TENT DIMENSIONS – 1261 X 2258 x 172MM | 49.6 x 88.89 x 6.77”

BRACKETRY AVAILABLE: (Excludes load bars)
Minimum load bar length: 1250mm | 49.2″

  1. UNIVERSAL LT-50 MOUNTING BRACKETS [To fit non Alu-Cab Load bars] 
  2. LT-50 TO ALU-CAB LOAD BAR MOUNTING BRACKETS
  3. LOAD BAR FEET FOR MOUNTING ALU-CAB LOAD BARS TO THE LT-50

Shipping Policy

THROUGH THE COVID-19 PANDEMIC WE ARE DOING OUR BEST TO MAINTAIN OUR SHIPPING SCHEDULES, BUT WE ANTICIPATE THERE MAY BE DELAYS IN ORDER PROCESSING AND SHIPPING.


***SHIPPING IS POA for large products and delivery so most smaller products***

Some exclusions apply, valid for all states, and applies to ground shipping via standard small parcel services like DHL, STAR TRACKS and other.

We do not ship big stuff to small P.O. Box Addresses (because it won't fit)

All orders that must ship truck freight will be shipped to the customer's nearest local freight terminal for WILL CALL pickup or to a verified commercial address for free. *Additional fees may apply.

Residential freight delivery is not free but available. Contact our customer service for a shipping quote. 03 8746 0340 or info@melton4wd.com.au.

 

***FREIGHT SHIPPING NOTICE***

Melton 4WD is not liable for shipping damages that take place during transit. We work diligently to assure your products are packaged and secure and are in perfect condition when it leaves our facilities.

Insurance is optional on POA shipping costs.

Please be sure that when you arrive at the freight dock or specified location to pick up your products that you inspect it for any damage. If you receive the product and take it home and find hidden damage and you didn't note it on the paperwork from the freight carrier, we have no recourse with the freight company and cannot file a claim.